Hifionics Medusa Serie Benutzerhandbuch Seite 29

Malfunction: „ERROR" message in connection between DSP device and your computer
Reason:
1. The DSP processor is turned off.
Note: The POWER LED and the USB LED must light up blue.
Malfunction: „The COM port could not open..." message in connection between DSP device and your computer
Reason:
1. In the connection window after the software start the wrong COM port has been selected or defined.
Malfunction: The stored settings can not be called up on the remote control via mode button
Reason:
1. The settings must be saved numerological (POS1, POS2, POS3, ...)
Please refer also in case of malfunction to the user manuals of the other devices of the sound system such as am-
plifier or head units.
TROUBLE SHOOTING
Remedy:
Remedy the cause
Remedy:
Select the correct port.
Check if necessary the port in the
Device Manager of Windows under
„Ports (COM & LPT)
„USB-Serial CH340".
Remedy:
Save the settings always numerological
(Refer to page 24).
29