Getting Started - Telestar IMPERIAL BAS 1 Bedienungsanleitung

Next track (Bluetooth & TF mode), increase
playback volume

4. Getting started

Before getting started, we recommend to fully
charge the IMPERIAL BAS 1 by using the USB
charging cable. Please follow the procedure:
• Connect the charging cable to the BAS 1's
micro USB port.
• Set up a connection between the BAS 1
and a charging device that provides a USB
port with 5V DC output power, such as Lap-
top or PC and activate this device.
• The status LED (see image 2) flashes
red, the charging process takes about two
hours.
• After the battery is fully charged, the colour
of the status LED will change from red to
green.
Hint: in order to maintain the battery power, we
recommend to disconnect the BAS 1 from the
charging device as soon as the charging pro-
cess is completed.
21
E