• sicheren • vorteilhaften Gebrauch des IMPERIAL BAS 1. Es wird voraus- gesetzt, dass der Bediener allgemeine Kenntnis- se im Umgang mit Unterhaltungselektronik hat und den Inhalt dieser Anleitung vor der ersten Inbetriebnahme zur Kenntnis genommen hat. 2. Sicherheitshinweise Auch wenn ein Lautsprecher an sich nichts ge- fährliches ist, sollen Sie mögliche Risiken beim...
wenn besondere Aufmerksamkeit gefordert ist, z.B. im Straßenverkehr. • Schützen Sie Ihr Gehör vor hoher Lautstär- ke. Vermeiden Sie, die Lautstärke nach ei- ner Eingewöhnungsphase kontinuierlich zu erhöhen. • Der Lautsprecher erzeugt Magnetfelder, die Herzschrittmacher oder implantierte Defibrilatoren beeinflussen können. Halten Sie einen Abstand von mindestens 3cm zwischen Lautsprecher und diesen Gerä- ten.
• IMPERIAL BAS 1 (je nach Ausführung in weiß oder schwarz) • Ladekabel (USB auf Mikro USB) • 3.5mm Anschlusskabel • Bedienungsanleitung • Garantiekarte 3.1. Abbildungen 1. Ein-/Ausschalter (Position links aus, Position rechts ein) 2. Status LED rot = lädt, grün =...
Seite 6
4. Mikro USB Buchse Buchse zum Laden des integrierten Akkus über das Ladekabel (im Lieferumfang enthalten) 5. Cinch Buchse Für den Betrieb mit externen Geräten über Kabel (AUX Modus) 6. (M) Taste Zum Wechsel zwi- schen Bluetooth-, AUX- und TF Modus 7.
USB Ladekabels vollständig aufzuladen. Hierzu gehen Sie wie folgt vor: • Verbinden Sie das Ladekabel mit der Mikro USB Buchse des IMPERIAL BAS 1. • Nun schließen Sie das Kabel an die USB Buchse eines entsprechenden Gerätes (Laptop, PC o.ä.) an und schalten Sie die- ses ein.
4.1. Bluetooth Modus Nachdem Sie den BAS 1 wie unter 4. beschrie- ben aufgeladen haben, können Sie den Laut- sprecher verwenden. Hier stehen Ihnen 3 Mög- lichkeiten zur Verfügung, die Sie durch Drücken der (M) Taste (siehe Abb. 6) einstellen können. 4.1.1.
blau. • Nun kann der BAS 1 mit dem Bluetoothge- rät verwendet werden. Hinweis: das Pairing muss i.d.R. nur einmal durchgeführt werden. Möchten Sie nach einer Pause die Verbindung erneut herstellen, sollte dies automatisch erfolgen, sobald Sie den BAS 1 einschalten. Möchten Sie ein neues Bluetooth Gerät mit dem BAS 1 verbinden, trennen Sie die bestehende Bluetoothverbindung durch Drü- cken und Halten der (>...
• Über (+) springen Sie in der Wiedergabe- liste einen Titel nach vorne (kurz drücken); bei längerem Drücken der (+) Taste erhö- hen Sie die Lautstärke der Wiedergabe. 4.1.3. Telefonmodus Sofern Sie ein Smartphone über Bluetooth mit dem Lautsprecher gekoppelt haben, steht Ihnen auch der Telefonmodus des BAS 1 zur Verfü- gung.
und halten Sie die (-) Taste. 4.2. TF Modus Dank des integrierten Micro SD Kartenlesers kann der BAS 1 auch Musikdateien von Spei- cherkarten wiedergeben. Um diesen Modus aufzurufen, gehen Sie wie folgt vor: • Stecken Sie eine Micro SD Karte in den Kartenleser (siehe Abb.
4.3. AUX Modus Der BAS 1 kann auch kabelgebunden zur Mu- sikwiedergabe genutzt werden. Hierzu steht der AUX Modus zur Verfügung. Gehen Sie hierzu wie folgt vor: • Verbinden Sie ein externes Wiedergabege- rät (MP3 Player o.ä.) über das im Lieferum- fang des BAS 1 enthaltene 3.5mm Audio- kabel mit der Cinch Buchse (siehe Abb.
5. Fehlersuchhilfe Problem Ursache Lösung BAS 1 lässt Akku leer Akku über sich nicht USB Ladeka- einschalten bel aufladen Keine Musik- 1. BAS 1 1. Durch wiedergabe befindet sich Drücken der hörbar im falschen (M) Taste Modus den Modus Wechseln 2.
Problem Ursache Lösung Bluetooth- 1. BAS 1 1. Modus verbindung im falschen über (M) Tas- kann nicht Modus te wechseln hergestellt 2. Bluetooth 2. Bluetooth werden nicht einge- einschalten schaltet und verbin- Bluetooth- Gerät mit Passwort verbindung Bluetooth- eingeben verlangt version <...
Defekt vorliegen. Gerne helfen wir Ihnen unter 02676/9520101 weiter. Alternativ kontaktieren Sie uns per Mail über service@telestar.de oder per Fax über die 02676/9520159. Können wir das Problem auf diesem Wege nicht lösen, senden Sie das Ge- rät bitte an unser Servicecenter unter folgender...
Seite 16
Table of contents 1. Preface 2. Your safety is important! 3. Scope of delivery 3.1. Images 4. Getting started 4.1. Bluetooth mode 4.1.1. Establish connection 4.1.2. Music playback 4.1.3. Phone mode 4.2. TF mode 4.3. AUX mode 5. Troubleshooting 6. Technical data 7.
1. Preface Thank you for choosing this high-quality product. This manual is kept brief because we know you want to start using the product in stead of rea- ding this manual. However for the best listening experience you need some basic information on the usage of the product.
Please check the scope of delivery before using the BAS 1 for the first time. The delivery contents includes following items: • IMPERIAL BAS 1 (white or black edition) • Charging cable (USB - Micro USB) • 3.5mm Audio cable •...
3.1. Images 1. On-off switch (Position left off, positi- on right on) 2. Status LED red = charging, green = charged, blue (flashing) = Bluetooth mode connection search, blue (per- manent) = Bluetooth mode connected, orange = TF mode & AUX mode 3.
Seite 20
4. Micro USB port Charging port for in- ternal battery via char- ging cable (included) 5. Cinch port For connection of external devices via cable (included), ope- ration in AUX mode 6. (M) button To switch between Bluetooth, TF and AUX mode 7.
Next track (Bluetooth & TF mode), increase playback volume 4. Getting started Before getting started, we recommend to fully charge the IMPERIAL BAS 1 by using the USB charging cable. Please follow the procedure: • Connect the charging cable to the BAS 1‘s micro USB port.
4.1. Bluetooth mode After charging the BAS 1 according to point 4, the speaker system is ready to use. The IM- PERIAL BAS 1 may be used in three different modes that can be selected by pushing the (M) button (see image 6). 4.1.1.
• The BAS 1 may be used with the connec- ted device. Hint: the pairing operation needs to be made only once. If you want to reconnect the device after a pause, it will set up automatically as soon as you switch on the BAS 1. If you want to con- nect a new device via Bluetooth, cut the estab- lished connection by pushing and holding the (>...
4.1.3. Phone mode If you have paired a smart phone to the BAS 1 via Bluetooth, you may also use the speakers‘ phone mode of the speaker. The phone mode may be operated as follows: • When receiving an incoming call on your phone, the music playback is paused and a ring tone sounds to signal the call over the speaker.
• Insert a micro SD card into the card reader (see image 3). Please note that the card needs to be inserted facedown. • Turn on the BAS 1 by putting the slide switch (see image 1) to „on“ position. •...
Seite 26
• Turn on the BAS 1 by putting the slide switch (see image 1) to „on“ position. • Turn on the playback device and com- mence the music playback. • Push the (M) button (see image. 6) to set the BAS 1 to AUX mode. The status LED will switch to orange.
5. Troubleshooting Problem Cause Solution BAS 1 may Battery Reload not be swit- empty battery ched on No music 1. BAS 1 in 1. Change playback wrong mode mode with audible (M) button 2. Switch 2. Playback on playback device swit- device ched off 3.
Problem Cause Solution Bluetooth 1. BAS 1 in 1. Change connection wrong mode mode with failure (M) button 2. Bluetooth deactivated 2. Switch on Bluetooth and connect Bluetooth Bluetooth Enter connection version on password requires device < BT (standard: password „0000“) 6.
Please feel free to contact us via email over ser- vice @telestar.de. If we cannot solve your problem this way, please send the item to following address: TELESTAR Servicecenter, Am Weiher 14, 56766 Ulmen, Germany.