Herunterladen Diese Seite drucken

Axis Communications FA 1080-E Installationsanleitung Seite 5

Thermal sensor unit

Werbung

English
Safety information
Read through this Installation Guide carefully before
installing the product. Keep the Installation Guide
for future reference.
Hazard levels
DANGER
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
NO TICE
NO
NO
TICE
TICE
Indicates a situation which, if not avoided, could
result in damage to property.
Other message levels
Important
Indicates significant information which is essential
for the product to function correctly.
Note
Indicates useful information which helps in getting
the most out of the product.
Safety instructions
NO
NO TICE
NO
TICE
TICE
The Axis product shall be used in compliance
with local laws and regulations.
Store the Axis product in a dry and ventilated
environment.
Avoid exposing the Axis product to shocks or
heavy pressure.
Avoid exposing the Axis product to vibration.
Do not install the product on unstable poles,
brackets, surfaces or walls.
Do not install the product on vibrating poles,
brackets, surfaces or walls.
Use only applicable tools when installing the Axis
product. Using excessive force with power tools
could cause damage to the product.
Do not use chemicals, caustic agents, or aerosol
cleaners.
Use a clean cloth dampened with pure water for
cleaning.
Use only accessories that comply with the
technical specification of your product. These
can be provided by Axis or a third party. Axis
recommends using Axis power source equipment
compatible with your product.
Use only spare parts provided by or recommended
by Axis.
Do not attempt to repair the product yourself.
Contact Axis support or your Axis reseller for
service matters.
The power supply shall be plugged in to a socket
outlet installed near the product and shall be
easily accessible.
Use a limited power source (LPS) with either a
rated output power limited to ≤100 W or a rated
output current limited to ≤5 A.
Transportation
NO TICE
TICE
NO
NO
TICE
When transporting the Axis product, use the
original packaging or equivalent to prevent
damage to the product.
Français
Informations sur la sécurité
Lisez attentivement ce guide d'installation avant
d'installer l'appareil. Conservez le guide d'installation
pour toute référence ultérieure.
Niveaux de risques
DANGER
Indique une situation dangereuse qui, si elle n'est pas
évitée, entraînera le décès ou des blessures graves.
AVERTISSEMENT
Indique une situation dangereuse qui, si elle n'est pas
évitée, pourrait entraîner le décès ou des blessures
graves.
ATTENTION
Indique une situation dangereuse qui, si elle n'est
pas évitée, pourrait entraîner des blessures légères
ou modérées.
A A A VIS
VIS
VIS
Indique une situation qui, si elle n'est pas évitée,
pourrait endommager l'appareil.
Autres niveaux de message
Important
Indique les informations importantes, nécessaires
pour assurer le bon fonctionnement de l'appareil.
Note
Indique les informations utiles qui permettront
d'obtenir le fonctionnement optimal de l'appareil.

Werbung

loading