Maintenance - rawlink 79476 Gebrauchsanweisung

• Connect the middle frame (2) and upper
frame (1) using the screws (A), washers
(D) and locknuts (C) (see Fig. 2).
• Insert four wheels (4) into each
designated place of the lower frame (3).
Use the hex key (H) to screw the sleeve
nuts (F) with the spring washers (B)
and washers (E) onto the threads of the
wheels (4). To do this, hold the wheels (4)
in place with the wrench (G). Screw the
remaining two wheels (4) directly into
the upper frame (1) (see Fig. 2).
4
1
2
Conversion from a creeper to a
stool
• Pull the locking pin (6) of the lower frame
(3) out as far as possible and hold it in
position.
• Fold the middle frame (2) up (see Fig. 3).
• Slowly release the locking pin (6) until it
locks into the safety hook (7) (see Fig. 3).
6
7
4
3
2
3
• Fold the upper frame (1) down until it
reaches a horizontal position (see Fig. 4).
The product can now be used as a stool.
Storage
Store the product in its stool position. Lay
the product down laterally on its frame to
prevent it from falling over or rolling away.
Store it in a clean, dry location that is not
exposed to direct sunlight.

Maintenance

Regularly check if all screws are suffi ciently
tight.
Retighten the screws, if necessary.
If any screw connections are damaged, have
an authorized technician replace them.
Cleaning
Do not use aggressive or abrasive cleaning
agents, as they can damage the surface of
the product.
Clean the product with a damp cloth and a
regular, commercially available detergent.
1
GB
15