Call Button (Transmitter); Unpacking And Testing Your Tiiwee Pager; Powering The Receiver; Testing The Product - Tiiwee Pager Handbuch

Call button (Transmitter)

Push button

Unpacking and Testing Your Tiiwee Pager

Unpack all kit components and lay them in front of you.

Powering the receiver

Open the battery compartment and insert the included AAA batteries. Close the
battery compartment.

Testing the product

· Switch on the receiver by using the On/Off-button.
· Now, press the call button.
· You will hear the "Ding Dong" sound, the receiver will vibrate, and the LED
indicator light will flash.
Testing the product
· The range of the system in an open area is about 75 meters. However, radio
signals are affected by physical and environmental conditions like walls, doors
and other barriers. Inside homes, the expected real range of the system is about
2-3 floors or 15-20 meters.
· Please always test if the operating range is sufficient for your desired use.

Adjust the sound volume

The volume of the sound can be adjusted in 4 steps by pressing the Volume button
with the tip of a pen.
Screw to open button
for battery replacement
Opening for lanyard
connection
4