Maintenance; Protecting The Environment - Black+Decker KX2200 Originalanleitung

♦ Use a high temperature setting for removing
paints and lacquers, and soldering plumbing
joints.
♦ If you are unsure about using this tool on a par-
ticular material, start with a low temperature
setting and perform a test on scrap material.
Hands free use (fi g. B)
The tool has stand locations (4) to facilitate hands
free use.
♦ Place the tool with the nozzle up on a surface
where it cannot be tipped over.
♦ Secure the cable to prevent pulling the tool over.
Warning! Always point the tool away from yourself
or other persons. Do not touch the nozzle. Take care
that no material drops into the nozzle.
Paint stripping
♦ Direct the hot air at the working area to heat up
the paint.
♦ Do not burn the paint. Keep the nozzle at least
25 mm from the surface.
♦ When the paint softens, remove the paint using
a scraper. Scrape the softened paint immedi-
ately or it will harden again.
♦ Scrape with the grain of the wood wherever
possible.
♦ Do not allow paint and debris to collect on the
scraper.
♦ When scraping from a vertical position, scrape
downwards to prevent the paint from falling back
into the nozzle.
♦ When stripping paint from a surface next to
glass, take the necessary measures to protect
the glass from the heat.
Warning! Use a glass protector nozzle when strip-
ping paint from metal or wood framed windows.
♦ Dispose of all paint debris safely and make sure
that the work area is thoroughly clean after use.
Cooling down
During use, the nozzle of the tool becomes ex-
tremely hot. After switching off, leave the tool to cool
down for at least 30 minutes.
♦ Place the tool with the nozzle up on a surface
where it cannot be tipped over.
♦ To speed up the cooling time, run the tool on
a low minimum temperature setting for a few
minutes before switching off.

Maintenance

Your BLACK+DECKER appliance has been de-
signed to operate over a long period of time with
a minimum of maintenance. Continuous satisfactory
operation depends upon proper care and regular
cleaning of the appliance.
Warning! Switch off and unplug the appliance and
allow it to cool down before doing any maintenance
on the appliance.
♦ Regularly clean the ventilation slots in your ap-
pliance using a soft brush or dry cloth.
♦ To clean the appliance, use only mild soap
and a damp cloth. Do not use any abrasive or
solvent-based cleaner. Never let any liquid get
inside the appliance and never immerse any part
of the appliance into liquid.
Mains plug replacement (U.K. & Ireland
only)
If a new mains plug needs to be fi tted:
♦ Safely dispose of the old plug.
♦ Connect the brown lead to the live terminal in
the new plug.
♦ Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth
terminal. Follow the fi tting instructions supplied with
good quality plugs. Recommended fuse: 13 A.

Protecting the environment

Separate collection. This product must
not be disposed of with normal household
waste.
Should you fi nd one day that your BLACK+DECKER
product needs replacement, or if it is of no further
use to you, do not dispose of it with household waste.
Make this product available for separate collection.
Separate collection of used products and
packaging allows materials to be recycled
and used again. Re-use of recycled materi-
als helps prevent environmental pollution
and reduces the demand for raw materials.
Local regulations may provide for separate collec-
tion of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
BLACK+DECKER provides a facility for the collec-
tion and recycling of BLACK+DECKER products
once they have reached the end of their working
life. To take advantage of this service please return
your product to any authorised repair agent who will
collect them on our behalf.
You can check the location of your nearest au-
thorised repair agent by contacting your local
BLACK+DECKER offi ce at the address indicated
in this manual. Alternatively, a list of authorised
BLACK+DECKER repair agents and full details of
ENGLISH
7