Vigan Mammoth TM4V1 Bedienungsanleitung Seite 17

2) Place the ingredients into a deep bowl or into vessel included in package.
3) Make sure you do not leave any dishes or other items in the ingredients container!
Then immerse the whipping attachment in the container.
4) Connect the appliance to a power outlet.
5) To prevent splashes of blended food, turn the control button only when the nozzles are fully
immersed in the food container.
6) Turn the device on (No. 2) and select the desired speed using the controller (No. 1).
We strongly recommend that you always start at the lowest level and gradually increase power.
7) If you want to use the highest power, press the TURBO button (No. 3)
8) After finishing whipping, disconnect the power cord from the socket and remove the gearbox with
whisk. Always separate the gearbox from the shaft during cleaning.
The gear unit must not be cleaned under running water or in the dishwasher.
USING APPLIANCES WITH IMMERSION ROD EXTENSION
1) Push the blending rod (No. 6) into the drive unit until it clicks into place.
2) Position cutouts against the buttons on the unit. To remove the attachment, press the release
buttons on the drive unit.
3) Place the ingredients into a deep bowl or into vessel included in package.
4) Make sure you do not leave any dishes or other items in the ingredients container!
Then immerse the whipping attachment in the container
5) Connect the appliance to a power outlet
6) To prevent splashes of blended food, turn the control button only when the nozzles are fully immersed
in the food container.
7) Turn the device on (No. 2) and select the desired speed using the controller (No. 2).
We strongly recommend that you always start at the lowest level and gradually increase power.
8) If you want to use the highest power, press the TURBO button (No. 3).
9) After finishing whipping, disconnect the power cord from the socket.
USING THE APPLIANCE WITH A SUBMERGED PASTEBOARD
ATTACHMENT
1) Push the attachment (No. 11) into the drive until you hear a click.
2) Position cutouts against the buttons on the unit. To remove the attachment, press the release
buttons on the drive unit.
3) Place the ingredients into a deep bowl or into vessel included in package.
4) Make sure you do not leave any dishes or other items in the ingredients container!
Then immerse the attachment in the container
5) Connect the appliance to a power outlet
6) To prevent splashes of blended food, turn the control button only when the nozzles are fully immersed
in the food container.
7) Turn the device on (No. 2) and select the desired speed using the controller (No. 1).
We strongly recommend that you always start at the lowest level and gradually increase power.
8) If you want to use the highest power, press the TURBO button (No. 3).
9) After finishing whipping, disconnect the power cord from the socket.
17
str