Basic Operation - VINCENT RC-572 Bedienungsanleitung

Point the front of the remote control directly at the front of the appliance,
making sure there are no objects between the remote control and the
appliance. The distance between the remote control and the appliance
should not be more than 7 m, as the reliability of the remote control is
affected beyond this range. Make sure that you do not point the remote
control at an elevated angle to the appliance, as beyond an angle of
±30° to the centre axis the appliance may not respond well to the remo-
te control.
Function keys (example)
VI. IV.
V. VII.
V.
Downloaded from www.Manualslib.com

BASIC OPERATION

I. On the HOME page use the page selection keys (6)(7), if
II. Choose a device key. If an infrared command has bee as-
II.
III. Choose the function key (e.g. "on/off"), the corresponding
IV. The infrared transmitter symbol
Please note: If a function key has not been programmed
with an infrared command yet, it is displayed in half
tone (dim, greyed). A touch to this key then has no effect.
III.
V. If the desired function key is located on one of the other
VI. Again, the page number (P1, P2, ...).is displayed in the
V.
VII. Press the HOME key to return to the device selection.
V.
manuals search engine
necessary. The page number is displayed in the title bar.
signed to this key, the associated infrared signal is sent now.
infrared signal is transmitted.
of the display.
function key pages, you can browse the pages using one of
the page selection keys (6)(7).
title bar.
appears in the title bar
Vincent
57