Gtech AirRam AR34 Bedienungsanleitung Seite 54

The brush bar can now be removed,
starting at the button end.
Re-insert the brush bar, starting by locating
the end furthest away from the button.
Then push the brush bar into the AirRam
until it clicks into place.
54
1627_AirRam2_EuroIntl_manual_aw.indd 54
To remove hair from the brush bar, run an
open pair of scissors down the groove to
cut the hair, then pull it out.
Replace the battery by sliding it down.
It will click into place.
15/06/2017 15:28