Axis P39 Serie Installationsanleitung Seite 18

English
Safety instructions
NO TICE TICE
NO NO TICE
•
The Axis product shall be used in compliance
with local laws and regulations.
•
Store the Axis product in a dry and ventilated
environment.
•
Avoid exposing the Axis product to shocks or
heavy pressure.
•
Do not install the product on unstable poles,
brackets, surfaces or walls.
•
Use only applicable tools when installing the Axis
product. Using excessive force with power tools
could cause damage to the product.
•
Do not use chemicals, caustic agents, or aerosol
cleaners.
•
Use a clean cloth dampened with pure water for
cleaning.
•
Use only accessories that comply with the
technical specification of your product. These
can be provided by Axis or a third party. Axis
recommends using Axis power source equipment
compatible with your product.
•
Use only spare parts provided by or recommended
by Axis.
•
Do not attempt to repair the product yourself.
Contact Axis support or your Axis reseller for
service matters.
Transportation
NO NO TICE NO TICE TICE
•
Keep the protective packaging. When
transporting the Axis product, the protective
packaging shall be replaced in its original
position.
•
When transporting the Axis product, use the
original packaging or equivalent to prevent
damage to the product.
Battery
The Axis product uses a 3.0 V BR1225 lithium battery
as the power supply for its internal real-time clock
(RTC). Under normal conditions this battery will last
for a minimum of five years.
Low battery power affects the operation of the RTC,
causing it to reset at every power-up. When the
battery voltage is low, a log message will appear in
the product's server report. For more information
about the server report, see the product´s web page
or contact Axis support.
Lithium coin cell 3.0 V batteries contain
1,2-dimethoxyethane; ethylene glycol dimethyl ether
(EGDME), CAS no. 110-71-4.
Dome cover
NO TICE TICE
NO NO TICE
•
Be careful not to scratch, damage or leave
fingerprints on the dome cover because this
could decrease image quality. If possible, keep
the protective plastic on the dome cover until
the installation is complete.
•
Do not clean a dome cover that looks clean to
the eye and never polish the surface. Excessive
cleaning could damage the surface.
•
For general cleaning of the dome cover it is
recommended to use a non-abrasive, solvent-free
neutral soap or detergent mixed with pure water
and a soft, clean cloth. Rinse well with pure
lukewarm water. Dry with a soft, clean cloth to
prevent water spotting.
•
Never use harsh detergents, gasoline, benzene,
acetone, or similar chemicals.
•
Avoid cleaning the dome cover in direct sunlight
or at elevated temperatures.
Français
Consignes de sécurité
A A A VIS VIS
VIS
•
Le produit Axis doit être utilisé conformément
aux lois et réglementations locales.
•
Conserver ce produit Axis dans un environnement
sec et ventilé.
•
Ne pas exposer ce produit Axis aux chocs ou aux
fortes pressions.
•
Ne pas installer ce produit sur des poteaux,
supports, surfaces ou murs instables.
•
Utiliser uniquement des outils recommandés
pour l'installation de l'appareil Axis. L'application
d'une force excessive sur l'appareil avec des
outils puissants pourrait l'endommager.
•
Ne pas utiliser de produits chimiques, de
substances caustiques ou de nettoyants
pressurisés.
•
Utiliser un chiffon propre imbibé d'eau pure pour
le nettoyage.
•
Utiliser uniquement des accessoires conformes
aux caractéristiques techniques de votre produit.
Ils peuvent être fournis par Axis ou un tiers.
Axis recommande d'utiliser un équipement
d'alimentation Axis compatible avec votre
produit.
•
Utiliser uniquement les pièces de rechange
fournies ou recommandées par Axis.
•
Ne pas essayer de réparer vous-même ce produit.
Contacter l'assistance technique d'Axis ou
votre revendeur Axis pour des problèmes liés à
l'entretien.
Transport
A A A VIS VIS
VIS
•
Conservez l'emballage de protection. Lors
du transport du produit Axis, l'emballage de