Installation Drawing - Limora SX-5513 Bedienungsanleitung

ISO Plug speaker-connector
• You can connect four speakers, see connection diagram.
• If you are connecting only two speakers, use the front termi-
nals. The fader must then also be set to front.
• You can use speakers with 4-8 Ohm impedance. Disconnect
the power supply before connecting the speakers to avoid
short circuits.
• Make sure that none of the speaker cables is grounded.
• The RCA connectors on the rear panel are for external amplifi-
ers. If no external amplifier is mounted, ignore the connectors.
Install the antenna: The aerial feed line must be plugged into
the antenna input provided on the radio. For good radio recep-
tion the antenna needs to be connected to vehicle ground.

Installation drawing

Bug Fixing
Please take a closer look at the radio and its functions in ad-
vance. Many supposed errors are undiscovered features.
- 18 -