Installation Instructions - Limora SX-5513 Bedienungsanleitung

green handset and ended with the red one as long as the phone
is connected to the radio.

Installation instructions

1. Installing the device
Please check the wiring diagram when installing (page 21)!
The radio needs a Din/ISO standard mounting slot. If your vehi-
cle does not provide the required slot, Limora offers a suitable
console with the order number 510899 that can accommodate
the radio.
To mount the metal frame/mounting frame, insert it into the
dashboard (or the mounting bracket) and fold down the fixing
straps with a screwdriver at suitable fixed points (see also
installation drawings).
The radio is pushed into the metal frame from the front. It can
only be removed from its metal frame using the two unlocking
keys supplied.
2. Electrical connection
The device is connected via a supplied Iso connector block. The
plugs are coded and can only fit in one position.
ISO Plug power supply:
• Yellow (storage line): 12V positive constant power supply (ter-
minal 30) for constant power supply of the data memory.
• Red (power line): 12V positive switched power (terminal 15) to
the switched (ignition switch) power supply of the device.
• Blue: Switching cable for electrical antenna (can remain
unconnected).
• Black: Ground (-)
Please install the electric connections to the vehicle properly and
professionally. Do not use irregular connectors to terminal 30
and terminal 15, but install a new 1.5 mm² lead from the fuse box.
- 17 -