Sony BRAVIA KD-75ZF9 Referenz-Anleitung Seite 11


CAM (Conditional Access Module)
• Provides access to pay TV services. For
details, refer to the instruction manual
supplied with your CAM.
• Do not insert the smart card directly into
the TV CAM slot. It must be fitted into the
Conditional Access Module provided by
your authorised dealer.
• CAM is not supported in some countries/
areas. Check with your authorised dealer.
• A CAM message may appear when you
switch to a digital programme after using
the Internet video.
 / AV IN
• For a composite connection, use an
Analogue Extension Cable (not supplied).
•
3.5 mm
1 2 3 4
1: L
2: Video
3: Ground
4: R
  (Headphone)
• Supports 3-pole stereo mini jack only.
• You cannot output sound from both the
headphone and the TV speakers at the
same time.
2
 IR BLASTER*
• Use your Sony remote control to control
your External Box (cable/satellite box).
Connect the IR Blaster Cable*
Blaster port on your TV. Place the other
end as shown below.
• To perform IR Blaster setup, press HOME
and select [Settings]  [External inputs]
 [IR Blaster setup].

• Connecting a large USB device may
• When connecting a large USB device,
• Connect a USB HDD device to the USB 3
 HDMI IN 1/2/3/4
• HDMI interface can transfer the digital
•
• To enjoy high quality 4K 50p/60p
• HDMI IN 3 ARC (Audio Return Channel)
  (RF input),
2
to the IR
• Connections for terrestrial/cable and
• For SUB. jack, connect only when you are
*1 For an external device which has only SCART AV
OUT, use a SCART-RCA adaptor and Analogue
Extension Cable.
*2 Only on limited region/country/TV model.
USB 1/2, USB 3 (HDD REC)*
interfere with other connected devices
beside it.
connect to the USB 1 port.
port (blue).
video and audio on a single cable.
< 12 mm
< 21 mm
contents, connect a Premium High Speed
HDMI cable and set the [HDMI signal
format] to [Enhanced format].
Do this setting individually for each
connected HDMI IN terminal. For details of
supported formats, refer to the
"Specifications" in this manual (page 18-
19).
Connect your audio system to the
HDMI IN 3 to route TV audio to your audio
system. An audio system that supports
HDMI ARC can send video to the TV, and
receive audio from the TV via the same
HDMI cable. If your audio system does not
support HDMI ARC, an additional
connection with DIGITAL AUDIO OUT
(OPTICAL) is necessary.
(Satellite input)
satellite. Connection steps: SUB.  MAIN
 Antenna
using twin tuner mode except for Single
Cable Distribution EN50494.
2
GB
11 GB