Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8.2 Video Settings
Go to <Main menu>-<record>-<Record Conf.>.
Channel] Choose the corresponding channel number.
[Redundancy] Choose the backup function to double backup the file.
[Length] Set time length of each video file between 1 minute to 120 minutes. 60
minutes as default.
[Mode] Set video state: schedule, manual or stop.
[Configuration] Record according to the set video type (common, detection) and
time section.
[Manual] Corresponding channels start recording 24 hours non-stop.
[Stop] Whatever state the channel is in, the corresponding channel recording
stops when stop button is selected.
[Period] Set time section of common recording, The recording will start only
among the set range.
[Record type] Set recording type: regular, detection, alarm. Regular: Record
according to the set time selection. The video file type is "R".
[Detect]: Within the set time section, triggering motion detect, video blind, video
loss or abnormal analysis. When above alarm is set as opening recording, the
recording detection state is on. The video file type is ''M''.
[Alarm]: trigger external alarm signal in the set time section. When above alarm is
set as opening recording, the "detection recording'' state is on. The video file type
is ''A".
Werbung
