Flat Spray Nozzle; Handling - AWG SANISTREET FLEX Betriebsanleitung

AWG I Operating manual I Fittings I

Flat Spray Nozzle:

The nozzle is simple to operate having only an open or closed position.
The spay jet is a flat jet with a spray angle of 25 °, ideal for wetting surfaces.
Nozzle Materials: Anodized aluminum, and powder coated, NBR, PA, POM, PTFE, Stainless Steel.

Handling:

1) Check the correct construction of the inductor.
2) Connect the flat spray nozzle to the fire hose.
Possible couplings are Storz B, 2.5" British Standard quick coupling, or NH 1.5", depending on the type of
SANISTREET FLEX system.
3) Align the flat spray nozzle to the desired area.
The delivery is started by operating the trigger.
The On/OFF pistol switch lever is not designed to regulate the flow rate.
Do not use the nozzle in a partly open position as this can seriously affect the mixing ratio of the decontaminant.
M1110B10 | Rev.00-06/20
© AWG Fittings GmbH . Bergstraße 25 . D-89177 Ballendorf . awg-info@idexcorp.com . www.awg-fittings.com
SANISTREET FLEX
IMPORTANT
ENGLISH page 18 of 20