5.3 Settings
:
├────Settings──┬─Switch
│
│
│
│
│
:
Settings>Switch
Automatisches Schalten, On/Off.
Switch Way, Zwangschaltung (Achtung: geht nicht wenn Automatic Enable = On und
Switch Mode = monostable, oder wenn Automatic Enable=On und das zweite Signal
einen Status≠OK hat)
Switch Mode, Monostable oder Bistable (Main bevorzugt oder beide Eingänge
gleichwertig)
Bypass Relays (Siehe 2.10.1)
Mono Operation, Bei Mono Operation=Mono und Switch Mode=monostable wird
Main auch dann bevorzugt wenn einer der Kanäle ausgefallen ist.
├─Input Main
├─Input Backup
├─XLR Output
├─UECP (Option)
├─Alarm Socket (Option)
└─Setting file
21