Remembering the Position
Adjust to the desired position using the ▲,▼,◄,► buttons.
2.
➣
If you press an arrow button when no OSD is displayed on the TV
screen, the Adjustment screen appears.
Press the INFO button to reset. Press the ◄ or ► button to select
➣
"Yes", then press the ENTER
the default setting.
3.
Press the blue button.
Press the ▲ and ▼ buttons to select a save mode from either Position 1,
Position 2 or Position 3 in order to save the current position.
➣
To not save the current position, press the RETURN button.
➣
When selecting a save mode, you cannot use the Colour buttons.
4.
Press the ENTER
➣
When Position1 is selected, the message "Current position saved as
Position1" is displayed.
5.
Press the ENTER
➣
The saved Position appears on the left side of the OSD.
Moving to the remembered position
1.
Complete Step 1 of "Entering the menu".
2.
Pressing a Colour (Red, Green, Yellow) button moves the auto wall mount
to the saved position.
➣
You can move the wall mount to one of the 3 pre-set positions by
pressing the Red (Position 1), Green (Position 2) or Yellow (Position
3) buttons.
➣
If you adjust the Position after moving to a pre-set position, the
position display will disappear.
➣
For installation, refer to the Installation Manual provided with the wall
mount.
➣
For product installation and the installation and moving of the wall mount,
make sure to consult a specialized installation company.
➣
This installation manual is to be used when attaching the wall mount to
a wall. When attaching to other building materials, please contact your
nearest dealer.
The auto wall mount will not work when Anynet + or WISELINK is operating.
➣
➣
37, 40 and 46 models are not compatible with the older wall mount model
(WMN5090A).
button. The position is initialized to
button to save.
button.
English -
Wall-Mount Adjustment
Position
2
Adjust
Save
Save
Select a mode to save.
Position
Position2
Position
Move
Enter
Wall-Mount Adjustment
Position
Position
2
Adjust
Save
Centre
Return
Centre