Installation - Südmetall 77.24.0122 Anleitung

INSTALLATION

Südmetall Keypad
Order no.: 77.24.0122 (silver) / order no.: 77.24.0124 (black)
1
Keypad dimensions:
51 x 91 x 14 mm
(WxHxD)
5
Insert battery.
NOTE:
The keypad should be installed within a radius of max. of 4 m to the radio lock. The installation spot should be
chosen so that there is as direct a line of sight as possible between the keypad and the lock. Installation behind
ledges or behind, e.g., cupboards/shelves, especially metallic ones, can cause disruptions in radio transmission
and should therefore be avoided at all costs!
•
•
•
Vertrieb & Logistik / Sales & logistics:
Süd-Metall Beschläge GmbH
Sägewerkstrasse 5 l 83404 Ainring / Hammerau
T +49 (0) 8654 4675-50 l F +49 (0) 8654 3672
Email: info@suedmetall.com l www.suedmetall.com
2
The keypad is designed for
installation on flat surfaces.
6
Alternative: external connection
to power supply
If the battery is inserted incorrectly, there is a risk of explosion!
Only use ER 14250 batteries 1/2 AA 3.6 V!
Please remove batteries when using an external power supply!
EN
3
5 mm
Attach the installation plate.
For this you can use the enclosed
screws and dowels.
7
1 (M3 x 6mm)
Pivot the top of keypad away
and attach the device with
the enclosed special screw.
Entwicklung & Produktion / Development & production:
Süd-Metall Schließsysteme Leipzig GmbH
Apelsteinallee 1 l 04416 Markkleeberg
www.suedmetall-schliesssysteme.com
4
3 (3 x 30mm)
8
Installation complete.
11