Onkyo VC-PX30 Bedienungsanleitung Seite 6

Operate the Unit
Using Amazon Alexa
1. By calling out "Alexa" towards the unit, the Amazon Alexa
voice service comes on and the light ring lights blue.
0 You can also turn the voice service on by pressing the
Amazon Alexa button.
2. Make sure the light ring is blue before asking questions or
giving instructions. The light ring goes around to indicate
Alexa has recognized the question or instruction.
e.g., "What's the weather for this weekend?"
"What's in the news today?"
"Set my alarm for 7 am on week days."
"Cancel the alarm."
"Remind me to take the dog for a walk tomorrow
at 2 pm."
"Play jazz music."
"Turn up the volume."
Using the Music Control App
You can use the Music Control App to play music. Start the
app, tap the product that outputs the music in "Connect", then
select the music to play.
0 If "Connect" is not displayed, tap "+", then tap "Add Zone".
0 When using multiple mobile devices, first download the
Music Control App to the devices after the first, then
connect them to the same access point as this unit. This
unit is automatically recognized after you start the app.
Registering a station
You can register up to 4 of your favorite radio stations. You
can call up stations with one press of a button by registering
them. Perform the following procedure when the unit is on.
1. Play the station you want to register on the Music Control
App.
2. Press and hold one of the Preset buttons 1 to 4 for
4 seconds. Repeat steps 1 and 2 to register your favorite
stations.
0 This feature may not be supported by some services.
Refer to the FAQ for stations you can register.
Refer to the following for FAQ:
http://www.eu.onkyo.com/en/faq/
0 You cannot register stations which you started playing with
Amazon Alexa.
6
Connection with other audio devices
To output audio from other devices
You can output the audio being played on this unit through
the speakers of another audio device. Turn off this unit before
connecting the supplied mini plug cable.
1. Connect the supplied mini plug cable to the AUX OUT jack
2. Turn on this unit and start play on the music app.
Amazon Alexa
button
To input audio from other devices
You can input the audio from other audio devices into this
unit.
You can also input the audio from other audio devices into
this unit, then stream via this unit to Play-Fi compatible
devices on the network for play. Turn off this unit before
connecting the supplied mini plug cable.
1. Connect the supplied mini plug cable to the AUX IN jack
2. After turning this unit on, tap the "i" at the top of the
3. In the Line In selection screen, tap the device connected
4. Select the device for streaming from the list of Play-Fi
5. Start play on the connected audio device.
Initialize
Initialize the settings of the unit to return the settings to the
status at the time of purchase. This returns the unit to the
status at the time of purchase, so take note of the settings
before proceeding. To initialize, press and hold RESET for
8 seconds. The unit makes a sound when initializing starts. It
takes about 30 seconds to initialize. When initializing is
finished, the Light Ring lights orange and rotates and the unit
is on stand by to receive initial settings.
on the rear and to the audio input jack on your audio
device, etc.
0 If there is no sound output from the audio device you
connected, check whether the audio output level on this
unit is too low.
0 Also refer to the instruction manual of the audio device you
want to connect for connection and operation details.
on the rear and to the audio output jack on your audio
device, etc.
screen in the Home screen of the app, then tap "Line In".
with the mini plug (this unit).
compatible devices in the network.
0 If there is no audio output, check whether the audio output
level on your audio device is too low.
0 Also refer to the instruction manual of the audio device you
want to connect for connection and operation details.