Beamz S1500LED Bedienungsanleitung Seite 21

DMX CHANNELS / DMX KANALEN / DMX-KANÄLE / CANALES DMX /
CANAUX DMX / KANAŁY DMX
Channel Function
1 Fog
2
3
Colour
4
5
6
Strobe
DMX control
Connect the device directly to a DMX controller or a DMX loop with multiple DMX effects. The machine has a 3-pin
XLR connector for DMX connection.
Address Setup: Use the DIP switch on the rear panel to set the start address. The base/start address is defined as
a first channel, where responsive to the device. Check if no overlapping channels are used!
Example addressing:
DMX address DIP on
10 DIP 4
DIP 2
24 DIP 5
DIP 4
233 DIP 8
DIP 7
DIP 6
DIP 4
DIP 1
TECHNICAL SPECIFICATION / TECNISCHE SPECIFICATIE / TECHNISCHE DATEN
/ ESPECIFICACIONES TÉCNICAS / SPÉCIFICATIONS TECHNIQUES /
SPECYFIKACJA TECHNICZNA
Rated voltage : AC220～240V 50/60Hz
Heating element : 1500W
LED : 9x 3W RGB
Heat up time : 2.5 minutes
Tank capacity : ca 2.5 liters
DMX Channels : 6 Channels
Function : DMX/Stand-alone
Dimensions per unit : 465 x 255 x 196mm
Weight (per unit) : 5.85kg
The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can
be changed without prior notice.
Value Description
000-255 Control the output volume
000-255
Automatic colour change
000-255
LED Green
000-255 LED Blue
000-255 LED Red
000-255 Strobe from slow to fast
Value for DIP switch
8
2
(8+2 = 10)
16
8
(16+8 = 24)
128
64
32
8
1
(128+64+32+8+1=233
)
Diagram
21