How To Use - LA VAGUE FLASH TRAVEL Handbuch

3

How to use

Brushing Instructions
1. Put the brush head under water and add toothpaste.
2. Gently place the bristles of the brush on your teeth at an angle of approx.
45° to the gum line.
3. Press the power button to activate the vibration.
4. Light pressure allows FLASH TRAVEL to achieve optimal results.
5. Move the brush head slowly and gently over your teeth and gums in a
reciprocating motion throughout the entire brushing time. Make sure that
the bristles reach between the teeth and massage the gums.
6. Brush your teeth for 30 seconds on each quadrant of your mouth (4/30
method).
7. After brushing all four quadrants, the vibration stops automatically after 2
minutes of continuous use the cleaning time recommended by the dentist.
8. To stop at any time, press the power button. Note: FLASH TRAVEL is safe to
use on braces and dentures (fillings, veneers, crowns, bridges, etc.). When
used on braces, the brush heads wear out faster.
Vibration modes
The first time you use FLASH TRAVEL, it starts automatically with the default mode. For
later use, the previously selected mode is used. Select the appropriate mode by pressing
the Mode Selection button. Together with the corresponding brush heads, FLASH TRAVEL
offers three modes for different oral care needs.
Choose from the following options:
Whiten - Removes stains on the surface
•
Clean - For exceptional everyday cleaning
•
Massage - Gentle massage of the gums
•
15