Quick Start Guide - Relaxxnow MGUN400 Benutzerhandbuch

FULLY CHARGE THE BATTERY
1
• Charge the battery fully (up to 3 hours) before
using the MGUN400 for the first time.
• Connect the charging cable to the charging port
at the bottom of the battery / handle.
• Plug the charging cable into a suitable socket.
ASSEMBLE THE DEVICE
2
• After the battery is fully charged, remove the
charging cable
• Insert the battery / handle firmly into the power
area of the MGUN400. You notice a click.
• Pay attention to the correct insertion position,
which you can recognize by the contacts and
the shape of the connector.
ATTACH THE MASSAGE DEVICE
3
• Make sure the device is fully charged and
turned off.
• Select the desired massage attachment
• Insert the attachment into the device so that the
slightly raised notch on the attachment matches
the groove on the device base. The contacts
must also match.
• Press the attachment firmly into the device for a
secure hold. Don't push forcibly!
• Attachments and speeds are explained below.

QUICK START GUIDE

RELAXXNOW
Relaxxnow 21