Jumper JPD-FR300 Bedienungsanleitung Seite 16

Screen Display
Out of the measuring range display
(for reference
only)
(for reference
only)
Recall 20 memories
Operating Instructions
Displayed State
Put the cover on the probe, switch
to the object measurement mode by
pressing the Mode button.The
thermometer enters the Object
mode. The "House" symbol
displayed on the screen.
Point the thermometer to the center
of the object. Press and release the
Measure button. The temperature
will be displayed on the screen.
In Ear mode, a temperature reading
of more than 42.0ºC (107.6ºF)
In Forehead mode, a temperature
reading of more than 42.2ºC
(108.0ºF)
In Object mode, a temperature
reading of more than 100ºC
(212.0ºF)
In Ear mode, a temperature reading
of less than 35.0ºC (95.0ºF)
In Forehead mode, a temperature
reading of less than 35.0ºC (95.0ºF)
In Object mode, a temperature
reading of less than 0ºC (32.0ºF)
13
Sound and
Backlight Color
See the table in the
"Sounds and
is
backlight color
instructions"
section.
A long beeps,the
backlight is red.
A long beeps,the
backlight is red.
EN