Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
InstallatIon
General information
InstallatIon
1. General information
this document is intended for qualified contractors.
Note
Read these instructions carefully before using the ap-
pliance and retain them for future reference.
Pass on these instructions to a new user if required.
1.1
Other symbols in this documentation
Note
General information is identified by the adjacent sym-
bol.
f Read these texts carefully.
f
Symbol
Meaning
Material losses
!
(appliance damage, consequential losses and environ-
mental pollution)
appliance disposal
f this symbol indicates that you have to do something. the
f
action you need to take is described step by step.
1.2 Relevant documents
Heat pump operating and installation instructions
1.3 Units of measurement
Note
all measurements are given in mm unless stated oth-
erwise.
2. Safety
only a qualified contractor should carry out installation, com-
missioning, maintenance and repair of the appliance.
2.1
General safety instructions
We guarantee trouble-free function and operational reliability
only if original accessories and spare parts intended for the
appliance are used.
2.2 Instructions, standards and regulations
Note
observe all applicable national and regional regula-
tions and instructions.
6 |
2.3 Intended use
the brine charging unit is a multi-function valve for filling and
filtering brine-based fluids.
any other use beyond that described shall be deemed inappro-
priate. observation of these instructions and of the instructions
for any accessories used is also part of the correct use of this
appliance.
3. Product description
the product includes a safety valve, a pressure gauge, a filter, a
quick-action air vent valve and a microbubble separator.
3.1
Standard delivery
- safety valve
- Hook wrench
4. Preparation
the product is installed in the heat source system in the heat
pump installation room.
f observe the flow direction (see chapter "specification /
f
Dimensions and connections").
f When installing the product, ensure that it is horizontal
f
and free from stress.
4.1
Minimum clearances
≥55
f Maintain the minimum clearances to ensure trouble-free
f
operation of the appliance and facilitate maintenance
work.
WPsF
Werbung
Inhaltsverzeichnis
