Innogy BRC8 Bedienungsanleitung Seite 4

EN
Function
The remote control is used to control
devices and functions which are integrated
in the SmartHome system. You can assign
one or more devices to a single button. This
allows several devices to be controlled
simultaneously, and thus means that differ-
ent actions can be performed with a single
press of a button.
Hazard warning
• Do not open the remote control. It does
not contain any parts to be serviced by
the user. If a fault occurs, please contact
our service.
• Avoid the influence of humidity, dust,
sunlight and other heat radiation.
Commissioning
1 Open the battery compartment by mov-
ing the cover of the battery compart-
ment in the direction of the arrow.
2 Insert the two supplied batteries (type
AAA) ensuring the correct polarity and
close the battery compartment.
3 Integrate the device via the user soft-
ware in the SmartHome system.
4 You can make a new attempt to integrate
it at any time by pressing a button on the
remote control.
General information
eQ-3 Entwicklung GmbH hereby declares
that this device meets the basic require-
ments and the other relevant regulations
laid down in Directive 1999/5/EC.
You can find the complete declaration of
conformity at:
www.eq-3.de/service/downloads.html
eQ-3 Entwicklung GmbH,
Maiburger Str. 36,
D-26789 Leer
Technical data
Name of device
Power supply
Battery service life
Radio frequency
Max. transmission
power
Open air range
Receiver class
Ambient tempera-
ture
Dimensions
Weight
Technical changes reserved.
Information about disposal
Do not dispose of the device in the
household
devices are to be disposed of via
the local collection points for old
electronic devices in accordance
with the Waste Electrical and Elec-
tronic Equipment Directive. Used
batteries do not belong in the
household waste! Please take them
to your local battery collection
point for disposal.
4
BRC8
2xLR03 (micro/
AAA)
Approx. 1 year
868.3MHz
10mW
Approx. 100m
SRD Class 2
+5°C to +35°C
40.5x135x15mm
(WxHxD)
53g
waste! Electronic