10. Only have the appliance repaired by a qualified service
centre.
11. Qualified service center: after-sales service of the
manufacturer/importer, which is qualified to carry out
repair to avoid any kind of danger. In case of problems
please return the appliance to this service.
Electricity and heat
1. Regularly check the power cord for damage.
2. To remove the plug from the plug socket, pull the plug. Do
not pull the power cord.
3. Make sure the power cord does not come into contact with
hot surfaces or steam.
4. Always remove the plug from the plug socket before you
move the appliance.
5. The machine should not be operated by means of an
external timer-switch or by means of a separate system
with remote control.
6. If an extension cord is absolutely necessary, a 10-ampere
cord should be used. Cords rated for less amperage may
overheat. Care should be taken to arrange the cord so that
it cannot be pulled or tripped over.
7. To avoid a circuit overload, do not operate another high
voltage appliance on the same circuit.
8. To protect against electric shock do not immerse cord,
plugs, or housing in water or other liquid.
9. Do not touch the appliance if it falls into water. Remove the
plug from its socket, turn off the appliance and do not use
it again.
10. Do not use the appliance close to hot objects such as a
stove or oven.
Using the appliance
1. The use of accessory attachment not recommended by the
appliance manufacturer may cause injuries.
2. Only use the appliance indoors, in dry areas away from
water.
- 3 -
RG-109528.2