Connect To Power Supply; On/Off Button; Stop/Pause; Use Of Remote Control - Zoef Robot BOBBIE 2.0 Handbuch

3. Installation

3.4 Connect to Power Supply

Plug in RB120TZ. 8
Important Notes:
Be sure your RB120TZ is always connected to AC power supply while working. Don't
use it if the backup battery is lack of power, use it after full charging. Take off your
W120-T asap, if the power supply is cut or unplugged accidently.
4. Operate RB120TZ

4.1 On/Off Button

A. Power On/Off button - Press for 2 seconds to turn on/off your RB120TZ.
B. Press the On/Off button once to start or stop the RB120TZ when it is placed on
window.
4.2 Start Your RB120TZ
A. Press the On/Off button for 2 secondes to turn on your RB120TZ.
B. Place your RB120TZ on glass, press again the On/Off button to start.
C. You can also start it from your remote control "START" button.
Caution: Before starting, make sure the edge of RB120TZ is 8 cm or more away
from window frames or corners.

4.3 Stop/Pause

A. When RB120TZ is cleaning, press On/Off
remote control to stop it.
B. When RB120TZ is cleaning, press Pause
C. You can also start it from your remote control Start

4.4 Use of Remote Control

Automatically "Z"
Z
Type Cleaning
Automatically "N"
N
Type Cleaning
From "Z" to "N" Cleaning
Z|N
A No Use Yet
B No Use Yet
Stop Cleaning
STOP
button on the device or the Stop
button on remote control to pause/restart it.
button.
Manual Move UP
Manual Move Down
Manual Move Right
Manual Move Left
Start Cleaning
Choose "Z" or "N" type automatically
Stop / Restart
8
8
button on