Inhaltsverzeichnis; Introduction - Husqvarna DM 200 Bedienungsanweisung

Introduction..................................................................... 5
Safety..............................................................................6
Operation...................................................................... 10
Maintenance................................................................. 12
Troubleshooting............................................................ 14
Transportation and storage...........................................15
Product description
This Husqvarna drill motor is a handheld diamond core
drill.
It can be used wet in all approved materials, if you use
the water supply. Refer to
can be used dry in masonry, if you use a dust extractor.
The diamond drill bit is a hollow drill that has diamond
segments.
If you drill wet, the water goes through the ball valve,
hose and the diamond drill bit. This decreases the
temperature in the drill bit. The water absorbs the dust
and flushes the drilled material out off the slot. Use a
slurry collector and a ring that collects the water to
remove the water again.
If you drill dry, use a dust extractor to remove the
material through the drill bit and the dust extractor
connection. This decreases the temperature in the drill
bit.
Some models of this product have embedded
Embedded connectivity on page
connectivity. Refer to
5 .
Embedded connectivity
The cloud asset management solution Husqvarna Fleet
™
Services gives the fleet manager an overview of all
Product overview
(Fig. 1)
1. Water connector
2. Drill spindle
3. Clamp ring
4. Mounting thread for water/dust extractor connector
5. Dust extractor connector
6. Gearbox
7. Gear selector
8. Auxiliary handle
9. Motor
10. Inspection cover
1416 - 004 - 02.07.2020

Introduction

Intended use on page 5 . It
Contents
Technical data.............................................................. 16
Accessories.................................................................. 17
Service..........................................................................17
EC Declaration of Conformity....................................... 18
Registered trademarks................................................. 19
products that are connected via either embedded or
aftermarket sensors. The position of the gateway or
smartphone can be used to indicate the location of
connected products. The sensors record data like
runtime, service intervals and more. For more
information about the cloud asset management solution
Husqvarna Fleet Services
Android app Husqvarna Fleet Services at https://
apps.apple.com/se/app/husqvarna-fleet-services/
id1334672726 or https://play.google.com/store/apps/
details?id=com.husqvarna.hfsmobile&hl=en.
Some types of this product are connected via the
embedded Husqvarna Fleet Services
the Bluetooth Low Energy (BLE) function. For more
information regarding how to use it, refer to
embedded connectivity on page 11 . For information
about the BLE technology radio spectrum, refer to
Embedded connectivity on page 17 .
Intended use
The product is used to drill concrete, rock, asphalt and
masonry. All other use is incorrect.
The product is used in industrial operations by operators
with experience.
11. Electronics box
12. Spirit level
13. Power switch
14. Main handle
15. PRCD
Note: In this manual we use the term PRCD for
PRCD and GFCI.
16. Adapter coupling
17. Wrenches
®
18. Gardena
™
, download the iOS or
™
male coupling with water valve
sensor that has
To use
5