For Your Safety; Product Description - Zander Aachen MVisio HMI Lite Kurz- Betriebsanleitung

Quick Start Guide MVisio HMI Lite
Quick Start Guide

For your safety

Intended Use
The HMI (Human Machine Interface) TX207 is used to control, operate and monitor machine processes.
The devices may only be used as described in these instructions.
Any other usage shall be considered improper and Turck shall not be held liable for any resulting damage.
General Safety Instructions
The device may only be assembled, installed, operated, parameterized and maintained by professionally-trained personnel.

The device only meets the EMC requirements for industrial areas and is not suitable for use in residential areas.

The device may only be used in accordance with applicable national and international regulations, standards and laws.

Functions and Operating Modes
Product
The HMI (Human Machine Interfaces) TX207 combines control, operation and monitoring in a full-scope control thanks to the
description
CODESYS V3 PLC with integrated visualization. The CODESYS 3 control of the TX500 has the functions PROFINET control-
ler, EtherNet/IP™ scanner and Modbus TCP as well as Modbus RTU master. Additionally the TX207 can be used as Modbus
TCP as well as Modbus RTU slave.
Further functions
Ethernet TCP/IP or UDP/IP communication

OPC UA Server and Client

Serial communication via RS232, RS485 and RS422

Dimensions
Tel +49 241 9105010 • Fax +49 241 91050138 • info@zander-aachen.de • www.zander-aachen.de
H. ZANDER GmbH & Co. KG • Am Gut Wolf 15 • 52070 Aachen • Germany
Errors and technical changes reserved
Dimensions
A 176 mm / 6.90"
B 136 mm / 5.35"
C 29 mm / 1.14"
H 147 mm / 5.79"
L 187 mm / 7.36"
T 5 mm / 0.19"
English Translation
M08
E61-455-00
6