Operation - Stroxx 3-D Handbuch

To charge Li-ion battery
Power supply:
Li-ion battery, or
4*AA batteries with cell holder, or
240V AC/DC charger
When the laser level is not
in use:
Connect the mini-USB
cable from the DC charger to the
Li-ion battery. Charge until power
indicator light changes to green
to indicate battery is charged.
When laser level is in use:
Insert Li-ion battery into the laser
level. Connect the DC cable of the
AC adaptor to the power socket
located on the right of the laser
level to charge the Li-ion battery
and operate laser level simulta-
neously.

Operation

Laser line indication
360 degrees x 3 laser lines
(12lines)
Switch ON/OFF
1. Insert batteries according to the "+,-"sign in the battery socket.
2. Set up the instrument on the floor, with the rotating base, or a wall mount or the tripod.
3. When using the tripod, support the centring nut of the instrument with one hand and tighten the centring
screw.
4. OFF/LOCK/ON button is located on the left side of instrument body .
5. Switch right to ON to start self-levelling operation and LOCK for incline function.
When the laser level is not in use:
Connect the mini-USB cable from
the DC charger to the Li-ion bat-
tery. Charge until power indicator
light changes to green to full
www.stroxx.eu
When the laser level is in use:
Insert Li-ion battery into the laser
level. Connect the DC cable of the
AC adaptor to the power socket
located on the right of the laser
level to charge the Li-ion battery
and operate laser level simulta-
neously.
7