Pairing Mode - Thonet & Vander VERTRAG BT Bedienungsanleitung

Downloaded from www.Manualslib.com
VERTRAG BT
TECHNICAL FEATURES
POWER OUTPUT: 36W RMS (18W + 18W)
FREQUENCY RESPONSE: 60Hz - 20kHz
DISTORTION: <0.1% - 1W
S/N: >65dB
SEPARATION: >40dB
ACOUSTIC BOX MATERIAL: Wooden box HDAA™
ACOUSTIC BOX SIZE: 161 x 190 x 240 mm
DRIVER SIZE: Woofer 4"
DRIVER MATERIAL: Aramid Fiber
IMPEDANCE/POWER: 4 Ω 20W
TWEETER SIZE: 0.5"
TWEETER MATERIAL: Silk
IMPEDANCE/POWER: 4 Ω 5W
ANTIMAGNETIC SHIELD
CONTROLS: Volume, treble, bass
INPUTS: Bluetooth® / RCA stereo /
ACCESSORIES
_ RCA - 3.5mm stereo cable
_ Transparent cable for connecting passive speaker
_ Power cable (IEC 60320 C7)
_ Power cable with tab IEC 60320 C7 - UK plug BS 1363
*Included in certain countries.-

PAIRING MODE

Switch on the device. This will remain in pairing mode
automatically during the following 3 minutes. If there is
no pairing after this time, you must turn off and turn on
the speaker again to go back to pairing mode and attempt
another pairing.
manuals search engine
EN
3.5 mm stereo
13