Technical Features; Cut-Off Frequency; Standby Mode - Thonet & Vander SW10 Betriebsanleitung

EN

TECHNICAL FEATURES

POWER OUTPUT: 100W RMS
FREQUENCY RESPONSE: 30Hz - 180Hz
DISTORTION: <0.5% - 1W
SNR AMPLIFIER: > 75dB
SEPARATION: > 45dB
ACOUSTIC BOX MATERIAL: Wooden box HDAA
ACOUSTIC BOX SIZE: 330 x 300 x 372 mm
DRIVER SIZE: Woofer 10"
DRIVER MATERIAL: Aramid Fiber
IMPEDANCE/POWER: 4 Ω 120W
ANTIMAGNETIC SHIELD
CONTROLS: Volume, cut-off frequency
INPUTS: Hi-level, low level
OUTPUT: Hi-level, low level
ACCESSORIES
_ Power cable (IEC 60320 C7)
_ Power cable (IEC 60320 C7) UK plug BS 1363
*Included in certain countries.-

CUT-OFF FREQUENCY

Allows you to adjust the frequency band in which the
subwoofer operates to reach the best sound definition.
"STAND BY" MODE:
With switch in AUTO position, the subwoofer will
automatically turn on when audio is played and will go into
"Stand By" mode when audio stops.
HI-LEVEL/LOW LEVEL INPUT-OUTPUT
Each playback device needs different types of amplification
to improve performance while minimizing distortion,
14
DEEP SOUND