Bestron AKS700SD Gebrauchsanweisung Seite 16

operAtion - placing the battery
The factory has already placed a battery in the appliance. If you want to replace the battery, please follow
the following instructions:
1. Open the battery compartment (6) at the bottom of the appliance.
2. Remove the battery and insert the new battery (CR2032).
3. Close the battery compartment again.
operAtion - before use
1. Place the device on a solid flat surface.
2. Turn on the device by pressing the on/off button (4). Wait until the LCD-display has settled.
3. Select the weighing system of your choice by pressing the Unity-button (5). In the display (1) shows a
dash alternating under g (European measuring system) and lb:oz (British/American measuring
system).
4. You can turn off the device by pressing the on/off button.
The device switches itself off when it's not used for 2 minutes. The appliance will remember your
choice of system after switch-off.
operAtion - Weighing
1. Place the device on a solid flat surface.
2. Optionally, you can place a bowl on the weighing plateau (3) for adding all the ingredients. Always do
this before you turn on the device.
3. Turn on the device by pressing the on/off button (4). Wait until the LCD-display has settled.
4. Start the weighing by placing the ingredients on the plateau (or bowl). The display shows the weight
now.
operAtion - Water volume measurement
1. Place the device on a solid flat surface.
2. Place a bowl on the weighing plateau (3) for adding the water. Always do this before you turn on the
device.
3. Turn on the device by pressing the on/off button (4). Wait until the LCD-display has settled.
4. Press the mode button (2) until there are dashes under ml (fl. oz) and water.
5. Pour the water in the bowl. The display shows the amount of water now.
operAtion - Milk volume measurement
1. Place the device on a solid flat surface.
2. Place a bowl on the weighing plateau (3) for adding the milk. Always do this before you turn on the
device.
3. Turn on the device by pressing the on/off button (4). Wait until the LCD-display has settled.
4. Press the mode button until there are dashes under ml (fl. oz) and milk.
5. Pour the milk in the bowl. The display shows the amount of milk now.
operAtion - tAre function
When you want to weigh multiple products after another without emptying the scales, you can use the tare
function:
1. Place the device on a solid flat surface.
2. Optionally, you can place a bowl on the weighing plateau (3) for adding all the ingredients. Always do
this before you turn on the device.
3. Turn on the device by pressing the on/off button (4). Wait until the LCD-display has settled.
4. Place the first ingredients on the weighing plateau (or in the bowl). The display shows the weight now.
5. Now press the Zero-button (4) to reset the value in the display to zero.
6. Repeat steps 4 and 5 until you have weighed all ingredients.
After you have removed everything from the weighing plateau, it will display a negative value. Press
the Zero-button to reset the display. The appliance is now ready for use again.
16
user's instructions