(Ii) Knife Blade • Kneading Blade • Whipping Blade • Grating Blade; Preparation Of Ingredients - Panasonic MK-F500 Bedienungsanleitung

FOOD PROCESSOR
How to Use : Knife Blade • Kneading Blade • Whipping Blade • Grating Blade
1
Place the Knife Blade (Kneading Blade or Whipping
Blade or Grating Blade) into the Bowl.
Note:
For the Knife Blade, ensure that the Drive
Shaft is protruding from the Knife Blade
after insertion.
3
Plug-in the plug into the socket and turn the Rotary
Switch to select the speed required (refer to
"Preparation of Ingredients" at page GB11-GB12).
Note:
• Always ensure that the Knife Blade is inserted before adding ingredients into the Bowl.
• Do not exceed the stated amount of ingredients for kneading as abnormal vibration may occur.
• Do not insert hot ingredients into the Bowl for processing. Always ensure that the ingredients are sufficiently
cooled before inserting, i.e. boiled potato.
• For Juice Make, fill in the solid ingredients first into the Bowl, followed by the liquid ingredients until the total
volume does not exceed 1,500 mL.
• When process the liquid ingredients together with ice cubes, put the ice cubes not more than 10 pcs (approx.
170 g).
• Do not exceed the stated amount of ingredients for the Kneading Blade as abnormal vibration may occur.
• Do not over process the whipping cream, it may break down to form clumps of butter.
• Using different brands of whipping cream will have varying results. It is recommended to process until the
cream is sufficiently whipped.
• Depending on the speed and amount of ingredients used, there will be significant vibrations present. In that
case, hold down the Bowl Lid with both hands to support it during its operation.
• For kneading, do not reprocess after the dough has formed the first time.
• High amounts of butter and sugar in the dough may cause abnormal vibration when using the Kneading Blade.
• Using flour other than bread flour on the Kneading Blade may cause abnormal vibration. Before processing,
remove 1 ~ 2 tbsp of water from the total amount stated and add the water little by little during processing if
necessary.
100_160419_MK-F500_Second_EU(UZ50G155).indb
- KNIFE BLADE • KNEADING BLADE
• WHIPPING BLADE • GRATING BLADE-
or
or
or


13
2

Put the ingredients into the Bowl. Place the Bowl Lid on
top of the Bowl and turn it clockwise until a 'click' sound
is heard. Insert the Food Pusher into the Feeding Tube.
Attach the Bowl assembly onto the Motor Housing as
seen in page GB11.
Note:
For the Grating Blade, place the ingredients on top of
the blade and spread them out evenly.
4

After the processing is completed, return the Rotary
Switch to OFF position "0" and unplug from the socket.
Remove the Knife Blade from the Bowl before removing
the processed ingredients.





GB13
2016/04/19 16:58:36