Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Technical Data
• Operating pressure: max 1 Mpa
• Recommended operating pressure: 0.1-0.5 Mpa
• Hot water temperature: max 80C
• Recommended hot water temperature:65C
• Rate of flow by 0,3 Mpa: approx. 14 l/min
Warning!
• Faucets or other water fittings installed in a place where water left inside them may freeze (e.g. during
the winter in unheated holiday accommodation) must be emptied for the cold period.
• Regular cleaning of the external faucet surfaces should be carried out using neutral or slightly alkaline
(pH 6-9) liquid cleaner, such as soap solution.
• We recommend that this product is installed by a qualified professional contractor.
• Please check this product immediately to ensure that it has not been damaged and is complete.
Before installation, please make
• sure this product is the correct model and you have all the parts required for installation and using.
• Please flush the water system to ensure that no metal swarf, solder, and other impurities can enter the
taps.
• Turn off water supply before commencing work, this should be done at the isolating valves of inlet
feeds if fitted or main stopcock.
• Please read these instructions carefully and keep it for future reference.
10
General
Werbung
Inhaltsverzeichnis
