Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
TESTMODE MENU
Press "MODE" until "TESTMODE", press "ENTER", press "ON + or OFF" to enable the output for testing the
diodes and align the LA ; The laseroutput will come on at very low power (Class1) This is useful if no DMX
signal is available and helps to setup the units on stage, press "ENTER" so save your setting ; wait a few
seconds until the Status menu appears. (backlight off)
HOURMETER
There is also a hourmeter installed. Press "MODE" until the display shows " HOURS"; press "ENTER" to see
the working hours of the LA.
SOFTWAREVERSION
Press "MODE" until the display shows the software-version
Downloaded from
www.Manualslib.com
manuals search engine
Werbung
Inhaltsverzeichnis
