Lightmaxx LS-4000 PRO WIND-UP STAND Bedienungsanleitung Seite 16

ENGLISH
Disassembly of the stand:
To disassemble the stand, lower the height of the telescopic poles to the
minimum height and make sure that all fixing bolts are inserted in the
lowest position of the holes and all locking screws are tightened.
The steel cable must be correctly and completely rolled up to avoid
crushing the fibres.
Then loosen the locking screw and pull out the fixing bolt.
Then pull the tripod legs back together to the tripod pole and insert the
fixing bolt, then tighten the locking screw again.
The tripod can be transported in vertical or horizontal position.