Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
Keep remotes out of reach of children.
Remote controls may only be operated by persons who are familiar with the system and have been instructed in their function.
•
•
Use the remote control only when you are in sight of the roller shutter.
•
Coding in remote controls must always be carried out within the vicinity of the door operator. Use only original parts.
Protect remotes from rain, snow, constant direct sunlight, and dust, otherwise the function of the transmitter may be impaired.
•
•
To change the battery, slide the cover on the back in the direction of the arrow
Code in remote control to roller shutter motor or radio receiver
LED blinks 1x
within 5 sec
Connect power
supply to roller
Press Setting
shutter
button 1x
Set the number of channels used
Press and hold
Press P1+
P1+ and P1-
and P1-
simultaneously
simultaneously
(ca. 5s)
1 time.
Display shows C
Schartec hereby declares that the radio equipment type RH15 complies with Directive 2014/53/EU. The full text of the EU Declaration of
Conformity is available at the following Internet address: www.schartec.de/en
As a dealer for the distribution of electronic, battery-operated devices, we are obliged by law to inform our customers about the following:
Electrical and electronic devices, as well as batteries, must not be disposed of as household or residual waste, but must be taken to
Roller Shutter Remote Control RH15
Frequency: 433.92 MHz / 100 KHz
Transmission Power: 10 mW
Channels: 15
Battery: 3 V (CR2450)
Working Temperature: -10°C to +50°C
Measurements: 130 x 45 x 11.5 mm
LED blinks 1x
LED blinks 1x
Press Setting
button 1x
Press P1+ or P1- to
select the desired amount of
channels used.
Display shows 15
Or
Programming Video
Please visit
www.schartec.de/en
Simplified EU Declaration of Conformity (CE)
Information about battery regulation
appropriate acceptance and collection points.
The complete version of the battery law can be found here:
http://www.gesetze-im-internet.de/bundesrecht/battg/gesamt.pdf
Schartec
a trademark of bau-shop-24 GmbH
Fritz-Müller-Strasse 115
73730 Esslingen, Germany
Up Button
Stop Button
Down Button
Change Channel
(P1-)
Up Button 1x
LED blinks 5x
Up button moves
the motor Clockwise
LED blinks 5x
Down button moves
the motor Clockwise
Down button 1x
Confirm choice by
pressing Stop
Display shows 0
Change Channel
(P1+)
Repeat this process for
each additional channel.
Werbung
