Maintenance And Service; Maintenance And Cleaning - Bosch EasyPump Originalbetriebsanleitung

14 | English
Inflation
Fit the appropriate adapter to the pressure hose (9) if re-
quired. If present, remove the valve cap on the item to be in-
flated.
Tighten the pressure hose (9) with or without the adapter on
or in the valve. The current pressure in the connected item
appears in the measured value indicator (b).
Inflation with Automatic Switch-off (AUTOSTOP):
– The last set pressure value appears in the target pressure
indicator (e). When using for the first time (factory set-
ting) or when the target pressure was previously deleted,
"−−" appears in the indicator.
– Setting or changing the target pressure: Press the reduce
target pressure button (6) or increase target pressure
button (10) as many times as needed until the required
value is set in the target pressure indicator (e). The value
will change more quickly if the buttons are pressed and
held.
– Press the pump button (11) to start the inflation process.
You can still change the target pressure during the infla-
tion process.
– The inflation process will stop automatically as soon as
the set target pressure is reached. The set target pressure
is saved when switching off the air pump.
Inflation without Automatic Switch-off (MANUAL):
– When inflating without automatic switch-off, there must
be no set target pressure ("−−" in the target pressure in-
dicator (e)). To delete a set target pressure, press and
hold the reduce target pressure button (6) until "−−" is
displayed.
– Press the pump button (11) to start the inflation process.
The current pressure in the connected item appears in
the measured value indicator (b).
– When the required pressure is reached in the measured
value indicator (b), press the pump button (11) again to
end the inflation process.
Errors – Causes and Corrective Measures
Cause Corrective measures
Warning indicator (c) in the display and the air pump
switches off
The air pump is outside of Allow the air pump to adjust
the permitted operating tem- to the ambient temperature
perature range. before you switch it on again.
Warning indicator (c) in the display during inflation
The electricity consumption Check whether the air flow in
is too high. the pressure hose or in other
parts is blocked.
Warning indicator (c) in the display when connected to
the power supply
Ambient temperature is out- Allow the air pump to reach
side the permissible charging the correct temperature. The
temperature range. charging process begins
automatically as soon as the
permitted charging temper-
1 609 92A 5NV | (14.07.2020)
Cause Corrective measures
ature range has been
reached and the warning in-
dicator goes out.
"Er1" indicator in the display
The pressure sensor does Have the air pump checked
not work. by a Bosch after-sales ser-
vice centre.
"Er2" indicator in the display
The air pressure on the con- Only connect the air pump to
nected item is outside the air items whose air pressure
pump's measuring range. does not exceed the max-
imum pressure specified in
the technical data.

Maintenance and Service

Maintenance and Cleaning

To ensure safe and efficient operation, always keep
u
the air pump and the ventilation slots clean.
If the battery is no longer working, please contact an author-
ised after-sales service agent for Bosch power tools.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Transport
The contained lithium-ion batteries are subject to the Dan-
gerous Goods Legislation requirements. The batteries are
suitable for road-transport by the user without further re-
strictions.
Bosch Power Tools