Werbung
Verfügbare Sprachen
Verfügbare Sprachen
nual, the transmitter is ready to operate. Switch
on the audio source, no switch on the BAT 1
by pressing the Power button (upper side), the
E
blue status LED will start flashing.
4.2. Switch on the terminal device that is to be con-
nected to the BAT 1 and activate Bluetooth
mode. Open the Bluetooth menu and pick the
BAT 1 from the list of available devices and
establish connection (see terminal device user
manual for more information). It might be ne-
cessary to enter a password - this password is
„0000" by default.
4.3. It is possible to simultaneously connect up to
2 devices to the BAT 1. To establish a double
connection, please connect the first audio ter-
minal to the BAT 1 according to point 4.2. of this
manual, then turn the terminal off and connect
the second device you wish to connect accor-
ding to point 4.2.. Afterwards, reactivate the
first terminal. After a short period for the pairing
process, both terminals should be connected
and may be used to replay the audio data.
8
Werbung
