First Use; Daily Use - Electrolux Juno JRZ94122 Benutzerinformation

• During normal operation, the temperature
currently present in the fridge (ACTUAL
temperature) is displayed.
• When the temperature is being adjusted a
flashing display indicates the fridge tem-
perature currently set (DESIRED tempera-
ture).
When changing the temperature setting wait
about 24 hours until the temperature display
has stabilised.
Temperature regulation
To operate the appliance, proceed as fol-
lows:
1. Set the required temperature by pressing
the corresponding temperature regula-
tor. The temperature indicator will imme-
diately show the changed setting (DE-
SIRED temperature) and the temperature
indicator flashes.
2. Each time the temperature regulator is
pressed the DESIRED temperature is ad-
justed by 1 °C. The DESIRED tempera-
ture must be reached within 24 hours.
3. Once the required temperature has been
set, after a short period (approx. 5 sec.)
the temperature indicator will show again
the current ACTUAL temperature inside
the corresponding compartment. The
temperature indicator will change from
flashing to continuous illumination.
For a correct storage of the food the following
temperature should be set:
• +5 °C in the fridge

First use

Cleaning the interior
Before using the appliance for the first time,
wash the interior and all internal accessories
with lukewarm water and some neutral soap
so as to remove the typical smell of a brand-
new product, then dry thoroughly.

Daily use

Movable shelves
The walls of the refrigerator are equipped
with a series of runners so that the shelves
can be positioned as desired.
For better use of space, the front half-shelves
can lie over the rear ones.
Downloaded from www.Manualslib.com manuals search engine
Important! When the setting is changed, the
compressor does not start immediately if
automatic defrosting is currently taking
place. As the storage temperature within the
fridge is reached quickly you can store food
immediately after switching on.
Schnellkühlen function
The Schnellkühlen function is suited for quick
cooling of large quantities of goods in the re-
frigerator.
To activate the function, do these steps:
1. Press the Schnellkühlen button.
2. The Schnellkühlen indicator switches on.
The Schnellkühlen function now provides for
intensive cooling. A DESIRED temperature of
+3°C is automatically selected.
The Schnellkühlen function is ended auto-
matically after a period of 6 hours.
You can deactivate the function at any time:
1. Press the Schnellkühlen button.
2. The Schnellkühlen indicator switches off.
Super Frost function
You can activate the Super Frost function by
pressing the Super Frost button.
The Super Frost light will light up.
This function stops automatically after 52
hours.
It is possible to deactivate the function at any
time by pressing the Super Frost button.
The Super Frost light will switch off.
Important! Do not use detergents or abra-
sive powders, as these will damage the fin-
ish.
electrolux 5