Bresser MicroSet 40x-1024x Bedienungsanleitung Seite 15

Troubleshooting
Error
No recognizable
image
Image fl ickers (while
observing with
optional available
MicrOcular)
= Monitor refresh
rate not adequate
Downloaded from www.Manualslib.com
Make sure your microscope has a long
service life.
Clean the lens (objective and eyepiece) only
Solution
with the cloth supplied or some other soft lint-
• Turn on light
free cloth (e.g.microfi bre). Do not press hard
• Readjust focus
as this might scratch the lens.
• If necessary, in-
crease resolution Ask your parents to help if your microscope
of graphics card
is really very dirty. The cleaning cloth should
be moistened with cleaning fl uid and the lens
wiped clean using little pressure.
Make sure your microscope is always protec-
ted against dust and dirt. After use leave it in
a warm room to dry off. Then install the dust
caps and keep it in the case provided.
manuals search engine
GB
15