Calculation Table For The Installation Of The Transponder - Target LaserTrack Bedienungsanleitung

Calculation table for the installation of the transponder

Use the table below when mounting the transponder in the grill or behind a vent hole of the vehicle.
Mounting the Target LaserTrack using the parameters below guarantees maximum performance.
Measurements are in millimetres
Minimum height (H) 6
Minimum width (W) 16
Maximum depth (D) 0
Minimum height (H) 23
Minimum width (W) 48
Maximum depth (D) 156
Cross-section of laser beam increases
with increase in distance D
D
8
8 9 10 11 13
18 21 23 26 28
12 24 36 48 60
24 25 26 28 29
51 53 56 58 61
168 180 192 204 216
H
Grill/vent opening
W
14 15 16 18 19
31 33 36 38 41
72 84 96 108 120
30 32 33 34 35
63 66 68 71 74
228 240 252 264 276
20 21
43 46
132 144
37 38
76 79
288 300