Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The indicator light is
on, but it doesn't
work
Key no response
Ingredients are
not broken
Spill
ER1
The jug and the host is not
assembled right(the jug not in the
correct place)
You don't press the switch
No water in the jug or add
too much water or too little water
A reminder call was made during
work
Short interval for Power cuts,
system doesn't reset
No water in the jug or add
too little water
The products have been
executed program
Add too much water or too little
water
The power voltage is too low
Too much food or too little food
Add too much water or too much
food
Too much electricity, or the food lad
is too heavy
Hazardous constituent and chart
connect the power
Put the jug on the right
place(host)
Choose the function and press
the switchc
Put the water between the
upper and lower water level
Unplug the power and then
connect again , follow the
right steps to get the job done
Short electricity for 3 minutes
and the connect the power to
use
Put the water between the
upper and
lower water levelt
Normal phenomenon
Put the water between the
upper and
lower water level
Use household stabilizer
Please follow the recipe
Please refer to the recipe
before you use the blender
Please follow the recipe
Werbung
