Herunterladen Inhalt Inhalt Diese Seite drucken

Wiseup DVR-0031-1080P Benutzerhandbuch Seite 3

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 5
3.4. MOTION DETECTION VIDEO RECORDING
3.4.1. Slide the power switch to the ON position. Power on the camera by pressing
the Power Button for 3 seconds. The blue indicator light will stay illuminated, indicat-
ing the camera has entered into standby mode automatically.
3.4.2. Press the Motion Detection Recording Button once to enter into motion detec-
tion recording mode. The blue indicator light will flash 3 times and then turn off.
3.4.3. When a movement is detected, the blue indicator light will flash once and the
camera will start recording video automatically.
3.4.4. Press the Motion Detection Recording Button once again to exit motion detec-
tion recording mode. The blue indicator light will stay illuminated, indicating the
camera is back to standby mode.
[Note]:
A video file will be generated and saved every 3 minutes automatically.
IV. Video/Image Files Uploads
4.1. Power off the camera, remove the Micro SD card and insert it into a card reader.
4.2. Insert the card reader into a PC computer.
4.3. The Micro SD card will be recognized as a removable disk drive.
4.4. All the files can be accessed in the "DCIM" folder.
V. Setting Time/Date Stamp
5.1. Power off the camera, remove the Micro SD card and insert it into a card reader.
5.2. Insert the card reader into a PC computer.
5.3. Removable disk drive folder appears.
5.4. Click on the drive in the root directory and inside the root directory, create a file
named "time.txt".
5.5. Write the current date and time in the "time.txt" file with the correct format:
YYYY.MM.DD HH:MM:SS (For example: 2016.04.12 14:24:32). Save this file.
5.6. Restart the camera and the system will upgrade the program automatically.
VI. Charging
6.1. Connect the smoke detector camera to an outlet AC power socket by using the
USB cable and charging adapter provided.
6.2. The blue indicator light will be illuminated during the charging process.
6.3. It will take 5 hours to obtain a full charge.
6.4. The blue indicator light will not change even when the smoke detector camera
is fully recharged.
Downloaded from
www.Manualslib.com
manuals search engine

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis