Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
assembly instructions
or
1
Place the floor insert
(if using) into the
planter, following the
contours. Open out the
(assembled) flow-ring
kit and fit the delivery
tube through the hole
in the floor insert (if
using) into the planter.
4
Ensure the planter
is positioned at the
indicator housing end
of the tank, leaving
a gap at the opposite
side. Place the
maintenance cover
over this gap.
For further information and video instructions, visit
2
Fit feet and
outlet to the
pump. Connect
flow-ring delivery
tube to outlet of
the pump.
5
Thoroughly wash
the clay pebbles
in clean tap water
until the run-off is
completely clear.
www.plantit-growit.com
3
Position the tank on a level
surface. Place the planter
in the tank with pump side
away from tank level indicator
housing. Planter should be
level and stable with pump
cable exiting via the planter
level indicator housing.
6
Fill with the clay pebbles,
ensuring that the flow-ring
delivery tube sits on top of
the pebbles.
Werbung
Inhaltsverzeichnis
