Inakustik AmbienTone Sub No.2 Einbauempfehlung Seite 8

INSTALLATION GUIDE
Step 3:
Secure the loudspeakers by screwing them onto the sub structure.
Standard, commercially-available drywall screws are recommended.
Screw spacing should be approx. 10 cm.
Step 4:
Spackle the grooves and uneven parts according to the instructions of
the plasterboard and filler manufacturers (Knauf Uniflott is
recommended).
Step 5:
Attach a suitable glass fibre matting in such a way that the front of
the loudspeaker and the peripheral joins are covered, so that a
sufficient grip of the wall covering is ensured and that there is no
crack. Please observe the matting manufacturer's fitting instructions.
08
Step 6:
Cut the glass fibre matting along the openings for the sound so that it
is completely open.
Downloaded from www.Manualslib.com manuals search engine