Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION GUIDE
Brief description:
The AmbienTone Sub No.2 makes your living room into a cinema experience. If you are missing the
bass foundation from the cinema or the disco while watching movies or listening to your CDs, then the
AmbienTone Sub No.2 is exactly made for you! This speaker is specialized for deep bass reproduction
and can be perfectly combined with the AmbienTone panels. (No.4, No.2, No.1)
This hi-tech in-wall subwoofer features a very low structure-borne sound thanks to its special design.
Wall vibrations and the transmission of noise to neighbouring rooms are therefore reduced to a
minimum, even without additional decoupling. The front of the subwoofer consists of a gypsum
plasterboard. It is screwed onto the substructure of drywall constructions and plastered over flush with
the surrounding plasterboard. A 10 mm narrow slit acts as a sound outlet and can be positioned
inconspicuously above the skirting board or close to the ceiling. The integrated special switch enables a
direct connection to a standard amplifier.
Technical Data:
10
Downloaded from
www.Manualslib.com
Design:
Passive stereo system
Dimensions:
500 x 625 x 86 mm
Recess:
435 x 570 mm
Installation depth:
73 mm
Power rating:
2 x 100 W max.
Impedance:
2 x 6 Ohm
Sensitivity:
85 dB (1 W/1 m)
Frequency range:
38–100 Hz
Max. acoustic pressure:
108 dB (1 W/1 m)
Scope of Delivery:
Subwoofer with connection cable
Installation instructions
manuals search engine
Drywall construction
framework 75 mm
Insulation
Drywall
constructi
Sealed with polytape
AmbienTone Sub 2 passiv
Sound outlet slit
(tape up with masking tape, for
example, before sealing and
remove afterwards!)
e.g. AmbienTrack skirting board
Floor
Werbung
