Werbung
Verfügbare Sprachen
Verfügbare Sprachen
General Safety Instructions
1. Read all the instructions in the user's manual, especially
the safety requirements see Safety requirements
2. Follow all instructions. Keep the user's manual for later use.
3. Follow all cautions and warnings indicated on the unit.
4. Disconnect the mains plug before cleaning the unit; don't
use any liquid or spray cleanser. Clean with a dry cloth.
5. Do not use the unit near water. Do not expose it to a humid
environment. Do not spill any liquid over the unit.
6. Unplug this apparatus during lightning storms or when
unused for long periods of time.
7. Do not block or cover any ventilation slots in the housing -
they guarantee the reliable functioning of the unit and
protect it against overheating. Do not install the unit into a
frame unless sufficient ventilation is guaranteed. Install in
accordance with the manufacturer's instructions.
8. Do not insert any objects through the slots of the unit, as
these could get in contact with live parts or could cause
short circuits. This may cause a fire and an electric shock.
9. Do not place the unit on unstable surfaces. It may fall and
get damaged.
10. Do not place any objects on the power cord. Protect it from
being walked on or pinched particularly at plugs and the
point where they exit from the apparatus.
11. If using an extension cord, make sure the rated output of all
units connected in aggregate does not exceed the
maximum rated output of the extension cord.
12. If the power cord or the mains plug is damaged, let a
qualified technician replace it immediately.
13. Only use power cords which are marked as safety-proof.
14. All service work should be exclusively performed by
qualified service technicians.
Downloaded from
www.Manualslib.com
manuals search engine
15. The unit is provided with a safety plug. This plug can only
be used with safety sockets. These precautions should
by all means be followed. If the plug should not fit into a
given socket (e.g. the case with old sockets), the socket
should be replaced by an electrician.
16. Do not ignore the safety purpose of the grounding-type
plug. A grounding type plug has two blades and a third
grounding prong. The third prong is provided for your
safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete
outlet.
17. As with all industrially manufactured goods, the use of
substances that induce an allergic reaction such as
aluminum cannot be generally excluded. If you develop
an allergic reaction (such as a skin rash, frequent
sneezing, red eyes or respiratory difficulties), consult a
physician immediately to determine the cause.
18. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped. Besides others, you run the risk of suffering an
electric shock.
19. If one of the following conditions occurs, please
disconnect the mains plug and call your dealer or
technical support!
Power cord or mains plug is damaged or worn.
-
Liquid penetrated the unit.
-
The unit was exposed to rain or high ambient humidity.
-
The unit does not function properly, even when
-
following all the instructions in the manual. Only
manipulate the controls as stated in the manual, wrong
settings on the controls may damage the unit.
The unit fell and the housing was damaged.
-
VPU light
Data
Transport
Important
Safety
Instructions
Safety and
Environment
Quickstart
Connect
Quickstart
ON / OFF
Maintenance
Conformity
23
Werbung
